cristian barbieri

7

hace 6 años

hi blackmaiden what i need is the value of the transistor is one of three legs if you look at the plate has engraved the designation of each component eg (r22, d8, r19) i need the value of T2 (it is screwed to a aluminum heatsink) that starts with BTA, but you do not see what follows, and in yours I recommend that you check the tab that connects to the station the cables are always cut and the side of the welder also

blackmaiden

27

hace 6 años

Now if you give me the option to comment, how I told you in the issue the transistor is Es BTA 08-600C
GK1NM VU and thanks to that, I saw that I have also burned it and the tracks that come from the connection of the pencil to that transistor are the 2 flown. And what I was told is that for something the transistor had jumped and burned and that if they changed it, I did not know if it could happen or not. What do you think, what can it be that happened? Should I get the transistor and repair those tracks by bridging them with some filaments or tin? I do not have much idea why I consult. Thanks, sld

cristian barbieri

7

hace 6 años

thank you blakmaiden tomorrow I fixed if I can get it or some replacement, eye is not a transisitor look for it and it is a triac, this triac controls the air temperature only, the one that controls the temperature of the pencil is T1 is a BT136-600E, safe you must have burned, with respect to the tracks flown by thin wire tinnate and supplant the tracks flown, if everything is fine you do not have to burn again, unless you forget it turned on as I happened to my haha! tell me anything has to walk I'll guide you, how do you get on with the tester? greetings and a thousand thanks !!