Electrical circuit
Thank you very much, but I need it from the direcionles, since I will use it with arduino
Yeah, look, this is what arduino will do, that's why I need to take out the 12 fixed volts
Look at the function that the arduino will have
1 when the vehicle is moving in front of the screen only shows me an image that is the rear camera
At this point arduino still will not do any work since this is in charge of the main module
2 When the vehicle is in front of you and you put the directional one on the left, then the arduino has to activate the step of the main module so that it makes the passage from the image to the lcd
When one deactivates the directional then
If I use a mega and all the code is ready, I just need to convert the 12 volts that come out of my directions to 12 volts continue
Check the timer circuit with a transistor and relay.
When the intermittent was before the turning lever, what I mentioned earlier did not work.
The capacitor and resistance are selected to keep the relay energized for 3 seconds.
as I see he wants if the directional goes to the left his arduino is activated. and if you then turn right, your arduino is activated with your camera. How is that voltage kept constant when the directional is a relay that turns on and off? I know what can be done I'm watching some videos right now ... wow if there is fabric to cut with all this
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
