⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Electronics and Circuit Design

Resistance

Olivaresjch
hace 5 años
hace 5 años
[b] Hello friends, a question if I do a component test in this case the resistance if I put the DIODE scale tester in the beep (Buzzer) good when I do sound test continuity bone resistance to me she does it have to sound? because according to her they are the passage of the current that means that it must not sound to be good or it is to know if it is good or bad, if it is good it sounds or it does not sound and if it is bad it sounds or it does not sound? If you understood me please help me with this question. [/B]
Seb12
Seb12
967
hace 5 años

Look for the color scale to get an idea of the size as soon as you see it, there are also applications for the cell phone, you will enjoy it

Responder
Seb12
Seb12
967
hace 5 años
hace 5 años
The resistors are not measured with the diode meter, they are measured with ohmmeter and the use of buzzer is relative. The buzzer will only sound if the measurement yields a very low value (<30 or 40 Ohm depending on the instrument). If the R is greater than that the buzzer will not sound and does not imply that the R is bad since it can be an R equal to or greater than 47 ohm look at this and you will understand https://www.bing.com/videos/search?q=probar+resistencias+mult%c3%admetro+sound&view=detail&mid=85EB646DFED554E0A23585EB646DFED554E0A235&FORM=VRRTAP also look at this https://cdn.yoreparo.com/uploads/default/0003/29/wp_ss_20180309_0005%20(2)-98112.png
Olivaresjch
hace 5 años

Friend, thank you very much the video helped me a lot, seriously thank you very much friend!

Responder
servimat1
servimat1
138.835
hace 5 años

Seb12. The size of a resistor does not determine whether or not it has audible continuity with a tester. This refers to its resistance. Regards

Responder
Seb12
Seb12
967
hace 5 años

Thank you for the contribution to correct my solution, SERVIMAT1
A hug and see you soon
Thank you

Responder
Seb12
Seb12
967
hace 5 años

I just had breakfast that you are a moderator, my name is Sebastian, I am a dentist from Buenos Aires, being here for me is a school, recently I started trying to increase my knowledge (poor) for my hobby
Whenever you can correct my mistakes and help me understand them, I am for the purpose of learning. I will never be offended or take it badly that you directly edit an answer if I have been wrong, it would be much more pain to feel the bleeding for the partners.
Please keep me in mind if I ask you things like that I don't always bother ELEKTOMAQ since I am almost always longer for your forums

Responder
servimat1
servimat1
138.835
hace 5 años

It will be a pleasure to give you a hand in whatever you need. Very interesting to learn another subject outside your profession. Among our ranks we have a fan expert who is a Corrientes surgeon. Best regards and congratulations.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis