⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Component Data Sheets

Kia7915pl

Manuel7
Manuel7
40
hace 6 años
hace 6 años
Please I would like to tell me how to check a voltage regulator: the kia7915pl, and another one that should be the same is not the:: ka7915, please if someone knows how to test to know if it is good. Thank you.
Manuel7
Manuel7
40
hace 6 años

Sorry for not answering, but try as I was told and it overheats a lot and does not regulate. I did it with several and even with a new and equal overheats hard and can not be tested. I don't know if I'm missing something. Thanks.

Responder
Ennio Montenegro.
hace 6 años
hace 6 años
Both are tested in the same way. The pin gnd is the positive of the source. The input is the negative of the voltage input. And the pin output is the negative regulated voltage output. The voltage to regulate must be greater than 15V and not exceed 35V. [img] https://adjuntos.yoreparo.com/imagen_post/0004/84/05 img]
JoseOrtiz
JoseOrtiz
1.274
hace 6 años
hace 6 años
With a voltage source greater than 15v, you apply negative on pin 1, the positive goes to pin 2, and pin 3 will be the negative regulated output, there you would place the black tip of the tester and the red one to the positive that you placed on pin 2 , I should mark you 15v

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis