Hello Forum! I have a Winco changer that belongs to a combined MOTOROLA / bgh, I have the problem on the plate, it oxidizes so to speak, the spin is not flat ... this ruins my records and the sound quality is interrupted. Take it out, wash the plastic washer-bolillero and the washer that follows with gasoline and lubricate with lithium grease (the red one), the rubber got it identical and glued it. What could be the problem? On the other hand I have another equal tray of a team of the same Brand but of another more advanced Model sc 600 (the previous mensonado is sc 400), it happens that the pink plate the black platform and the lightning !!!! I did the same as with the other, wash and lubricate. But touches ... will I have to add another washer? Is it comsigue ?? Thank you

hello you have to change the motor suspension rubber and regulate the height of the pulley on the motor shaft, if you have an intermediate pulley of a single floor the height adjustment screw is a copper one that is in the same motor support. the adjustment is made with the engine running and the plate, if the pulley has a game you have to get a very thin fiber washer to remove the game in its absence, look for bronze, I never found, I had to do it with paper Spain. To make the adjustment, he used a four-legged bench on the back where he turned the discs to spin and could absolve him