⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Old Electronics

Winco turntable tray engine problem

nazareno2014
hace 6 años
hace 6 años
Hello dears! My problem is the following: I have a turntable tray winco of a combined MOTOROLA / BGH Sc 400 year 1969. The problem is that I think that would be a capacitor that is together with the silver-like turntable engine similar to a battery. Well the point is that it started to smell of burning rubber or melting plastic very loud, I was listening to a vinyl at maximum volume to dimension, and I decided to turn off the tray and the equipment, then I lifted the tray and at the bottom of the chassis floor there was how a lagoon of a dark brown liquid dripping from the capacitor, is this achieved? Why could this happen? The engine seems in condition, change reggaetons that hold the engine, but the question is this starter would it be? How it burst, and the connection terminals were loosened together with the noodles that wrap the terminals when the disk that covers the same melts and at the same time they keep these terminals fixed. I look forward to your help. Thanks forum, atte
pr122
pr122
10.397
hace 6 años
hace 6 años
place a .38mf x 400v silver polyester or mica capacitor if you don't get that value place 2 in parallel one of .33 and another of .047 greetings
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis