⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Electromedicine

Storz 175w Xenon bulb does not turn on

Carlos urquiza

hace 6 años

I am repairing a STORZ Xenon Light Source 175W 20132120-1. The lamp does not turn on and I do not have a damaged lamp alarm or life limit. You have a DC Condor power supply and the lamp controller card. I do not know the test values of the voltages to follow up on the fault. If someone can give me some information I would appreciate it.

Comentar



servimat1

138.835

hace 6 años



hace 6 años

Hi. Reading your datasheet and assembly I see that the plate that you mention is a 10 to 15 volts. It must be a stabilized source of power. Did you check fuses? I leave the link of the manual so that you see in particular pages 19 and 20. Greetings http://www.myspace.com/

Comentar

Carlos urquiza

hace 6 años

Thanks for your support. All fuses are OK. The lamp is 12.5v. And the manual is not of the referred equipment. The team is a storz 20132120-1. I need to know the output voltages DC source and some other information to get the fault. Thank you



Responder

servimat1

138.835

hace 6 años

It must be this other. The voltage values you need are those you mention. At the output of the board you must have 12.5 volts. regards http://shop.stopler.nl/documents/ot/instruction-manuel-cold-light-xenon-175.pdf

Comentar

Carlos urquiza

hace 6 años

Yes. That is the equipment operation manual. What I need is the service manual to see the voltage values and to be able to follow the fault. The Xenon lamp requires a starting voltage of 5000V and is then maintained at 12.5V. But I do not have any of the two values at the output to the lamp. If you want to give me your cellular email onWhatsapp and I send you an image of the Power Source



Responder

servimat1

138.835

hace 6 años

Hi. By regulation you should not request or give this type of data. If you want to upload a photo you can edit your original query by placing it there. regards



Responder