⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Dental Equipment

Implant motor does not start. Driller BLM 600

José09

hace 5 años

Hi Friends .. Someone knows that the voltage is drawn from the power source of the driller blm 600 implant motor. It does not turn on the display

Comentar

junior259

103

hace 5 años

If what does not turn on is the backlight of the screen, it may be a backlight LED or the voltage that is not reaching the backlight



Responder



junior259

103

hace 5 años



hace 5 años

Your computer must have a card on which you can locate the source stage ... it is usually 24 or 12 volts with which you work ... if it does not turn on, maybe a fuse, or voltage regulator could be damaged, check the different equipment were ... the first thing to check would be the power cable, and then source ... Fuses, etc ...

Comentar

José09

hace 5 años

What a friend if it is a problem of the source card an integrated top250yn burst and I also burn an optocoupler but I have replaced it and still it does not draw tension I have verified the other components but I have not found anything strange. Obviously there is something I am not seeing. I'm going to replace that integrated one catches my attention that I can't measure voltage between its pins



Responder