⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Motors and Windings

weg motor rewind

Mauricio leontecnico

hace 5 años

good afternoon some colleague will have the steps and data number of turns and wire gauge of a single-phase 1.5hp 110 and 220 6-pole weg motor please whoever has it can send it to me thanks

Comentar

termelec

3.726

hace 5 años

Cheers slots

Comentar

Mauricio leontecnico

hace 5 años

24 slots friend, and how many wire hairs use the gear and the starter and the number please. thanks

Comentar

termelec

3.726

hace 5 años

Cheers the wire gauge is double number 18 awg, seri connection at 220v and parallel to 110V The boot is 18awg caliber a thread, The pitch of the travel coil is 6 groups of 1 coil per group, step 1.4 or 1.5 depends on you and the same groups at start-up the same step I will give you the numbers of spiras more later

Comentar

Mauricio leontecnico

hace 5 años

greetings friend, you send me the number of turns please start and start, and you tell me that the start step is the same, so they are mounted on the march, which capacitor could use in that motor, tomorrow I buy the wire to start rewinding it on saturday

Comentar

Mauricio leontecnico

hace 5 años

friend, you send me the number of turns and what condenser that motor can carry

Comentar



termelec

3.726

hace 5 años



hace 5 años

Cheers because of travel I could not answer you, do it at step 1.4 the number of turns, it is 66 laps I recommend using double gauge number 19awg, because I do not think that it enters the slot you mention is a few slots that engine, but those It's the turns join 3 groups in series and get 2 points, then the other 3 groups also get 2 more points and you have for series 220 and parallel 110 for starting 80 turns of number 19 awg 1 wire, you put a 15 uf gear capacitor

Comentar