⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Motors and Windings

12v ac transformer

Briandebasa

hace 6 años

I have 3 questions n ° 1: How many turns of wire does it take in the secondary winding to deliver 12v, n ° 2: I can get about 20A (with wire of which millimeter), n ° 3: yes or if you should use wire enameled copper, or I can use common copper wire (without the enamel). Thanks in advance

Comentar

Edurau

835

hace 6 años

According to your questions and the meaning of them, I appreciate it, however, I recommend that you buy one that you need or take the one that has to be rewound according to your needs. luck



Responder



Yonny Diaz

2.185

hace 6 años



hace 6 años

Hi calculate here Also here The output power will also depend on the primary winding ... (If it is already done) If this (primary) winding was calculated for a lower power, it can be heated if you oversize the secondary ... You can not use bare copper, recommended the enamelling itself for that purpose (Otherwise they will cut the turns) Regards

Comentar