⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Electric Goalkeepers
Goalkeeper netyer t3 does not sound chicharra
1
hace 5 años
hace 5 años
HELLO I NEED URGENT HELP. ONCE I TAKE OUT ALL THE CABLES BECAUSE I DIDN'T WANT TO HAVE A PORTIC FOR A PARTICULAR PROBLEM AND NOW I DON'T KNOW HOW TO CONNECT IT. YOU NEED, THE BUILDING SACO THE ELECTRIC DOOR) YOU LISTEN WELL FROM THE STREET AND FROM WITHIN THE DEPARTMENT AND SHORT .. ONLY THAT THE CHICHARRA.NO SOENA.I MADE A BRIDGE BETWEEN TWO CONNECTORS BUT I DON'T BELIEVE IT GOES THERE .. IN ANY SIDE IBA BECAUSE I LEFT THERE INSIDE BUT LOOSE. I DON'T HAVE A TESTER OR ANYTHING.
PD.VOLVI TO EDIT QUESTION WITH PHOTO
5.181
hace 5 años
hace 5 años
Hi
Upload photo of the cables and the device without its cover and see what can be done. regards
Pd: I imagine that if you were without a phone some time now you can't ask for miracles
I leave an image of the t4 with a photo indicating the connections of the T3
regards
regards
5.181
hace 5 años
There are two white wires disconnected, one marked and one on the right almost below the inverter. Disconnect brown bridge and connect any of the white ones and see if it sounds. You should help yourself with someone on the street who keeps the bell tight.
5.181
hace 5 años
From what I see the brown is not connected to anything, the bridge should make it to the terminal that is just to the left (That would be the first test) then the rest. Comment
1
hace 5 años
The white wire that marks in the photo connects it below where the bridge in the number had made the other white wire was never connected. That is safe. It still sounds good but the buzz still does not sound. Until 1 week ago it always worked. My mistake was not to take a picture before taking it. I also did not understand what it means by investor.
5.181
hace 5 años
The inverter is the set of contacts that cut off the communication, it is the other white cable loose and twisted. Did you try connecting the brown to the terminal on your left? That is PM (supposedly negative)
5.181
hace 5 años
Hello chame90 I would like to know if you have followed the suggestions and if you have solved your problem Thank you and greetings on the day of the homeland.
5.181
hace 5 años
I'm glad. Was it solved with the indicated bridge or otherwise? just to keep the record and serve another user. regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad