⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microsoft Windows

Problem entering the bios, marc: dell, model: optiplex 390

AGL.
AGL.
207
hace 5 años
hace 5 años
PROBLEM ENTERING THE BIOS, MARC: DELL, MODEL: OPTIPLEX 390, it has the administrator password, and I cannot enter the bios, it is blocked when trying to enter the bios by pressing f12 asking me for the password, YES if it allows me to enter the bios and today He doesn't let me in, but it already blocked me more, yesterday he let me see the bios menu, but he couldn't configure anything, today he doesn't let me get to the menu. Any suggestion or recommendation for me is good. I already removed the battery from the bios, I already removed three jumpers are the only ones that it brings on the card, and nothing that restores the bios, and uuppss, well I hope to count on the help of your bald knowledge. THANKS; GREETINGS, PEOPLE
Apple7
Apple7
620
hace 5 años
hace 5 años
If you can boot some kind of diagnostic software such as hirentbootcd which has tools to reset the BIOS, that is, deleting its configuration between its password, Salufos!
AGL.
AGL.
207
hace 5 años

the disk reader is deactivated in the bios, the only boot option that is activated is; of hard disk and usb, but it turns out that I already restart it with the bootable usb with window7, and it does not start from the usb and I can not configure the boot either, the same thing happens asking me the pin, to enter the configuration, but well I will continue trying other methods hoping to find the solution.
thanks thanks

Responder
Apple7
Apple7
620
hace 5 años

If you have enabled the function to bounce the usb, with that it is perfect, you can now bounce the hirenbootcd from a usdb unit and then "crack" the bios!

Responder
jams-
jams-
87
hace 5 años
hace 5 años
Good night, analyzing your case I will guide you: you must go to the following link http://www.dell.com/support/home/co/es/cobsdt1/product-support/product/optiplex-390/manuals You must choose the type or format of your case (PC case), although the manual should not vary as to what will be investigated, for this case take the first option "computer monitor" as an example and download the manual that comes in Pdf format; you open it and go to page 54 "system configuration program" you must read very carefully all that chapter where you indicate the series of keys that you must press to access the boot options of your pc and the configuration of the BIOS. regards
AGL.
AGL.
207
hace 5 años
hace 5 años
good afternoon companions, THANK YOU, for your valuable support, I inform you that my problem has already been solved, in my case it was solved by changing the configuration of the jumper, and it was not necessary to apply more tests, and on the ideas of the comments thanks for that in my case is good buy, orita would be applying, thank you thank you
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis