⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Sources and UPSs

Backup battery for fiber optic router Claro Argentina

Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años
hace 5 años
Hello folks friend. I have doubts about connecting a battery directly to Claro's fiber optic router. Every time the power goes out I run out of phone and I would like to know if it is possible to connect a direct battery, of those 12v 7a / h. I know that I can solve it with a UPS, but it is small faces and if there is the possibility of connecting a direct battery I would not mind doing it manually. Thanks for the help regards
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

At last I got the connection plug, I could try and it works ok, also the phone, what does not last anything is the battery that is half old. In 20 minutes he patted.

Responder
Salvador perez maximo
hace 5 años
hace 5 años
Hello good night, I have it done with the same battery and it works great, you receive cordial greetings ok friend.
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Hi Salvador. Are you connected directly? And does the phone also work?

Responder
Salvador perez maximo
hace 5 años

I do not have a phone but the internet and the wify goes luxury goes from the battery to the router mine is for wify I did tests with tablet and last 7 amps with a tp-link router goes directly from the battery to the router since its original power supply is 12 volts 1 amp very practical but the answer of the phone can be connected by wify if it is a mobile if it is another type of phone I have doubts but in case of power cuts it goes very well I also have the original battery charger that warns when loaded greetings ok friend.

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Sorry Salvador for my insistence, is the charger apart? Because I have an emergency light charger. You only connect the battery.

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

If so, I am already looking for a connection pin of some old charger because the next one is quite thick, and I would only have to respect the polarity.

Responder
Salvador perez maximo
hace 5 años

No apologies, I just connect the battery and after using the charge correctly and I have the charger on my table, it was cheaper than a sai fence greetings ok friend.

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Thank you very much Salvador, you honor your name, you saved me !!
Thank you again and get to work

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

I leave open to tell you how the graft was, in fact it is the solution.

Responder
bubytres
bubytres
21.847
hace 5 años

Here is the topic where I talk about this savior:
https://www.yoreparo.com/computadoras/internet/preguntas/5762356/router-con-bateria-auxiliar-no-me-da-internet-con-alimentacion-sy
Look, edit your answer and link this savior if it's what you said you did and it worked ...

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Hi bubytres, do I understand that you are interested in knowing if it works? I just have to get the connection pin, the original one is the thickest of all since the router's charger is 12v 2a

Responder
bubytres
bubytres
21.847
hace 5 años

Hi Ricardo, I was telling Salvador to put the link in his answer, that topic is created by him and there are the steps of how he did the project and so on ... that's why I told him that if that was the circuit and everything I try then to put it in your answer ..

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Thanks bubytres. What he answers here is different, I think, since he says he places the battery alone and the charger is separate. In that link it has everything together, with two zener diodes and it seems that does not work. Well, it is what I understand. For now I am going to put only the battery when the power goes out, of course tomorrow I will be doing a test and comment.

Responder
Ricardo Ab.
Ricardo Ab.
5.181
hace 5 años

Impossible to try, I do not get the connection pin, it is a rare measurement and format. I see if I find another way to try.
While I close the subject Thank you all

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis