ryzen 3 2200g processor + motherboard a320m s2h gygabyte + ram memory hyperx fury black ddr4, 2666mhz + porder source 600 watts + ssd 480 gb kingston ...... BUY THE parts in amazon mexico .... everything is already connected but it does not turn on ... eh searched if there is a compatibility problem and apparently the mother supports all the components ... the memory frequency makes me doubt ... Support for DDR4 3200 (OC) / 2933 (OC) / 2667 * / 2400/2133 MHz memory modules * Actual support may vary by CPU. It makes me think that the frequency of the memory I bought is not compatible by the asteric that appears in 2667 someone could guide me ... excuse me are novice in this ..... I have already connected the green and black cable of the source thinking that the source is defective but if it turns on and on another computer it works without problems ..

Start by turning on the board with CPU and source, without battery or RAM. Then you add CMOS stack, RAM, ... When it stops turning on. There you have a valuable clue. The last thing you connect, hard drive and optics. I understand you mean by not turning on that the source is "dead" (fan does not rotate). Greetings from Uruguay