⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Computers

pc ecs- eup mother board

rodercapi
hace 5 años
hace 5 años
the PC came from another technician supposedly the blow and when he went to turn it on, he did not turn on the scroll this first I thought it was the source and then I try it walla this good the source, help me with this which is the possible fault, why disconnect the entire hard drive from the fans discarding some short but also does not turn on thanks for your help
Comentar
Marcos Ramirez
hace 5 años

friend neither the led nor anything turn on even for a moment?

Responder
ray_yoshua
hace 5 años

If the "technician" blew it, see if there are no traces that he could have spit somewhere or if he does not lack any component.

Responder
ray_yoshua
hace 5 años
hace 5 años
First try another source to discard and clean the memory contacts, sometimes they get dirty and make false contact.
Comentar
rodercapi
hace 5 años

friend already checked it was the power button was the cables turned and already starts in processor fan and the source, and it remains cm if it was ok but it does not give me image

Responder
ray_yoshua
hace 5 años

If you take out the memory you would have to make some beeps; If you have problems with memory.

Responder
vicentico3084
hace 5 años
hace 5 años
Try to clean the RAM, take it out for a while the battery puts everything and turn it on
Comentar
rodercapi
hace 5 años

brother I already took the ram and the battery and nothing has happened probe another ram and another battery, I saw in tutorials the chip set can also be the cause

Responder
rodercapi
hace 5 años

that is. SOLUTION!

Responder
Marcos Ramirez
hace 5 años
hace 5 años
try flashing the bios from a usb.
Comentar
rodercapi
hace 5 años
hace 5 años
thank you very much everyone and solutions take out the battery and now
Comentar
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
COMPRAR
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
COMPRAR
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis