

It would be good if you pass us the model of the AC / DC source (charger) in question. And if you can, the reference of the components (ex .: C301)
Hi Samael, if you already disassembled the source then check the electronic board. You must have a "model number" printed on the board. If you find it, indicate it, as well as the charger model.
Keep in mind that a font has many components, so they can't tell you all the values. What you can do here is upload a photo of both sides of the plate. E indicates the capacitor number (for example C5 or C8) to make it easier to identify the two capacitors you are missing.
Hello again, here I leave the data I found. The model of the charger is ADP-33AW B. The plate has the same model inscribed in its upper part only that instead of "B" says AA, it can be seen in the first image that I just attached to the question. On the back it has a number that is 294014630 that in the image can be seen enclosed in a red circle. The capacitor that does not remember its value is the C10. In the attached images you can see the place where both capacitors were located.
The other capacitor is not inscribed the reference of the component inside the plate. Although in the description of the question, he asserted that he did remember its value, I would still like to verify it because the memory is still fragile. In the images attached I can see with blue the place where the capacitors were in question. Thanks in advance for your answers.