hello I had a government canaima and the problem that presents me is that n wants to grab charge works perfectly with the charged battery but when connecting the charger nothing at all. I used to use it with a charger that had the cables of the ends failing bone and stripped and there were short feelings that a fuse has been burned Y or T? And if that were the case, is it possible to replace them with a generic fuse or with a 1n4148 diode diode?

I would recommend that with the board, carefully, try to measure the tension on the board, the female connector that goes over the board may be damaged internally and with the measurement of the source does not reach, make sure that the voltage enters the plate.