⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Apple Computers

my PC goes out I did my best! motherboard asus m2n-mx se plus

WalterEduardo1984
hace 5 años
hace 5 años
Hello, my PC turns off first once in a while, now it's a while and it turns off at any time. motherboard is: asus m2n-mx se plus What I did was to draw the graphic thinking that it was the source, place the source that came with the machine and let it standard bony 1 GB RAM, without the graphic Gforce 512 MB graphic, buy a generic source of 600w brand kelyx model: LBU- ATX / 600. I thought about temperature, put silicone paste in the prosesador and the integrated graphic (black heatsink) cleaning the previous one, and cleaning the machine. I feel that what I suppose is the integrated graph heats and burns and then heats the 512mb gforce graph but that heats but does not burn, cooler has one more but not about that. I analyzed for viruses and it is still the same today I was downloading the windows update and it turned off leaving the green light on inside and if you wait for a while it does not start you have to completely cut off the power for a while and then if it starts take out the battery and neither. I don't know what to do anymore. I have read of everything else that my life understands but not a solution. From already thank you very much ;(
emilianorkpc
emilianorkpc
1.116
hace 5 años
hace 5 años
Hello friend, what you could try to rule out possible failures is to completely disconnect the hard drive, and start your computer from a flash drive with some live operating system, eg linux, and use the device to see if it turns off. comment
WalterEduardo1984
hace 5 años

I do it and I tell you, thanks

Responder
WalterEduardo1984
hace 5 años

Hi, I turned it on, I went to setup to start it from usb I was changing it and it turned off I had the hard disk disconnected ... I mean I couldn't even start from usb that turned off

Responder
emilianorkpc
emilianorkpc
1.116
hace 5 años

Hello again, the machine is complicated, let's see, if I understood correctly, you tried and bought another source and nothing, did you try another ram? That is a doubt that I have left. Everything is pointing to a failure on the board, another test you can do is disconnect everything, I mean everything that is not necessary and may be causing conflicts, for example a CD player, front panel audio and USB, also power led, hdd led, power swich, reset. Another question I have left, has an internal speaker, of those who give beeps as error codes? If you do not have it would be good to get .........

Responder
emilianorkpc
emilianorkpc
1.116
hace 5 años

also turn it on without ram memories, and it should give beeps accusing lack of memories. if you manage to enter the setup check if you have the option monitor hardware to see that it tells us especially the temperature and the voltages of the source.

Responder
emilianorkpc
emilianorkpc
1.116
hace 5 años

Now I was looking at the official page of your badge, it has already opened, but it is still valid and it would not be a shame. What version of the bios do you have installed? 602?

Responder
WalterEduardo1984
hace 5 años

Hello, thank you very much, if I also lean towards the motherboard probe disconnecting everything, it is more and noticed that when it is cold it goes longer and the speaker does not bring, and tested with a micro temperature program and serca brand of 40 c In black color and after a while it starts to rise and turns yellow and after another time it goes off, isn't the PC the other in a crazy and I write down prices only that you recommend me to buy a basic one instead of changing the plate? I still have the bios review the temperature indicated, the voltage and I do not know the version of the bios, then I tell you ...

Responder
Marcos 2018
hace 5 años
hace 5 años
Most likely, it is the motherboard, if you already tried micro and ram, surely it is the Mother check if you have any capacitor inchado
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis