⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Cell phones
Problem with INOVACEL S25
hace 5 años
hace 5 años
[b] What happens that in the first instance the cell phone only stayed at the beginning, did not turn on well, then I decided to flash it. Everything was going well, I was already able to fully turn on the cell phone, but I decided to flash it again. Remember that at the time of flashing it had two options, one was that it only installed some things that were missing on the cell phone and another was that it installed everything without noticing what was missing or not, and I decided to make it complete. Already after the phone was turned off and the menu is no longer open to perform the recovery and on the PC it is heard that it connects but sends an error that it is not possible to recognize the device. I need to know what to do to solve this problem. [/B]
hace 5 años
If you use SPFT.
https://www.youtube.com/watch?v=fywPVpFKTLg--------From this video I base myself to flash it.
In the 3:05 minute he says of some boxes that should not be checked, and that in the second flash I remember that I marked them thinking that it would be better ... I do not remember very well, it already has half a year of that time and the truth was newbie in these aspects.
Right now I try to do the same as the video but the cell phone doesn't recognize me anymore, it connects and disconnects and it doesn't give me a chance to do anything.
8.263
hace 5 años
hace 5 años
First, why do you flash it twice if the first time it was good?
and second, with what program did you flash it?
with sp-flashtool '
Then I imagine that you have selected formatting and download, in luar de download only.
Well, if so, then now you have a real problem because with that you deleted everything until the files that the cell phone needs to flash.
with sp-flashtool forget it then, possibly with professional box they can load the software again.
So you learn, just by making mistakes you learn the right way
374
hace 5 años
hace 5 años
What software did you use to flash? I don't understand when you say:
"that he only installed some things that he lacked on the cell phone and another was that he installed everything without noticing what was missing or not"
Since SPFT does not have those options, I have the doubt .... Now in case you have eliminated the bootloader formatting the equipment, you will have to start it again via test point, making a bridge between the kcol and gnd points, installing only the preloader, dismantling the testpoint and flashing the entire operating system again ...
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad