⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cell phones

Moto E2 when it runs out of signal the touch goes crazy !!

pindiri
pindiri
273
hace 5 años
hace 5 años
Hello comrades, I found this problem which left me completely disoriented !!!! I got a MOTOROLA E2 device which had its module broken.I was able to change it and everything perfect !!!. At 2 weeks the client gave it to me brings because this module "failed". I have it in test and NADAAA everything works perfect. But that I discovered ....... That when said equipment is without a 3G service signal and the letter E appears in its signal the device goes crazy !!!! windows open to make calls open the camera !. AT THE TIME YOU RECOVER the signal HO H + returns to normal. Did this happen to any of you ??? I appreciate your help as always .For the moment I am inclined for a configuration error of the company that provides the service.But it says that it is the module.But if or it goes the signal works perfect !!!!! I clarify that the signal goes in places where the signal goes in any equipment. Example basements or buildings with subsoils.
GuerraSanta
GuerraSanta
16.617
hace 5 años
hace 5 años
Hello! It never happened to me, did you try using it without a chip to see if the same thing happens? If you don't have to do a hard reset or flash it!
pindiri
pindiri
273
hace 5 años
hace 5 años
[quote="GuerraSanta"] Hello! It never happened to me, did you try using it without a chip to see if the same thing happens? If you don't have to do a hard reset or flash it! [/Quote] Hi mate, I am doing a hard reset at this time. I will test it and comment that it happened. The inconvenience happens when the signal goes down to E only. What I did not realize is to try with another chip that could also be a possible cause of the failure.
GuerraSanta
GuerraSanta
16.617
hace 5 años
hace 5 años
[quote="pindiri"] [quote="GuerraSanta"] Hello! It never happened to me, did you try using it without a chip to see if the same thing happens? If you don't have to do a hard reset or flash it! [/Quote] Hi mate, I am doing a hard reset at this time. I will test it and comment that it happened. The inconvenience happens when the signal goes down to E only. What I did not realize is to try with another chip that could also be a possible cause of the fail. [/quote] Hi, tell him how it went!
pindiri
pindiri
273
hace 5 años
hace 5 años
[quote="GuerraSanta"] [quote="pindiri"] [quote="GuerraSanta"] Hello! It never happened to me, did you try using it without a chip to see if the same thing happens? If you don't have to do a hard reset or flash it! [/Quote] Hi mate, I am doing a hard reset at this time. I will test it and comment that it happened. The inconvenience happens when the signal goes down to E only. What I did not realize is to try with another chip that could also be a possible cause of the fail. [/quote] Hi, tell him how it went! [/Quote] For now nothing turned out. I already did soft reset, hard reset, wipe cache, work without memory, changing the sim and the same thing happens when changing the network to 2G. I have to flash and see what happens.
GuerraSanta
GuerraSanta
16.617
hace 5 años
hace 5 años
[quote="pindiri"] [quote="GuerraSanta"] [quote="pindiri"] [quote="GuerraSanta"] Hello! It never happened to me, did you try using it without a chip to see if the same thing happens? If you don't have to do a hard reset or flash it! [/Quote] Hi mate, I am doing a hard reset at this time. I will test it and comment that it happened. The inconvenience happens when the signal goes down to E only. What I did not realize is to try with another chip that could also be a possible cause of the fail. [/quote] Hi, tell him how it went! [/Quote] For now nothing turned out. I already did soft reset, hard reset, wipe cache, work without memory, changing the sim and the same thing happens when changing the network to 2G. I have to flash and see what happens. [/Quote] Hello, ok you have to exhaust all possibilities!
Fernando09
hace 5 años
hace 5 años
Look you can do a factory reset but try first clean the plate and the signal area with isopropyl alcohol, then heat the signal area with the hot air station by putting flux paste arrives for a better soldier if you don't know how to do or Finding the signal zone looks on YouTube how to clean the signal zone. REGARDS.
pindiri
pindiri
273
hace 5 años
hace 5 años
[quote="Fernando09"] Look you can do a factory reset but try first clean cpn the plate and the signal area with isopropyl alcohol, then heat the signal area with the hot air station putting arriva flux paste for better soldier if you do not know how to do or find the signal area look on youtube how to clean the signal area. GREETINGS. [/Quote] HELLO Fernando thank you very much for the help !!! I commented that in addition to flashing it I proceeded to change the module and follow the problem.But it occurred to me to change companies and ... CHAN !!!! It does not fail !!!! so It is a problem of the company CLEAR !!! THANK YOU AGAIN!
pindiri
pindiri
273
hace 5 años
hace 5 años
[quote="Fernando09"] Look you can do a factory reset but try first clean cpn the plate and the signal area with isopropyl alcohol, then heat the signal area with the hot air station putting arriva flux paste for better soldier if you do not know how to do or find the signal area look on youtube how to clean the signal area. GREETINGS. [/Quote] HELLO Fernando thank you very much for the help !!! I commented that in addition to flashing it I proceeded to change the module and follow the problem.But it occurred to me to change companies and ... CHAN !!!! It does not fail !!!! so It is a problem of the company CLEAR !!! THANK YOU AGAIN!
GuerraSanta
GuerraSanta
16.617
hace 5 años
hace 5 años
[quote="pindiri"] [quote="Fernando09"] Look you can do a factory reset but try first clean the plate and the signal area with isopropyl alcohol, then heat the signal area with the hot air station putting arriva flux paste for a better soldier if you do not know how to do or find the signal area look on youtube how to clean the signal area. GREETINGS. [/Quote] HELLO Fernando thank you very much for the help !!! I commented that in addition to flashing it I proceeded to change the module and follow the problem.But it occurred to me to change companies and ... CHAN !!!! It does not fail !!!! so It is a problem of the company CLEAR !!! THANK YOU AGAIN !!!! [/quote] Hi, how good you solved the problem with your team!
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis