⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cell phones

tlf brand vetelca 2

Jose Abreu
hace 6 años
hace 6 años
good afternoon who can help me with a tlf vetelca 2 does not turn on the battery is good and the power button is good the charging port is good they tell me that it is the damaged plate that colleagues can inform me or solve
Jose Abreu
hace 6 años

nothing has been solved yet it is still sorry for that movement where it says accepted solution

Responder
Alaen
Alaen
2.336
hace 6 años

We would be talking about the damaged software ... more complicated even they delete the firmware and never wake up.

Responder
Alaen
Alaen
2.336
hace 6 años

But what I tell you I know about other brands and models that are sold here in Cuba, not specifically for that ... although cell phones are all the same.

Responder
Jose Abreu
hace 6 años

ah ok the solution will be to buy another tlf how bad i don't know what to buy from my wife because all these tlf androids when the logo sticks already say bad badge I have a samsung that turns on well sometimes and after a while or how it can be at days it turns white is a J1mini model 105m will be bad plate also alaen

Responder
Alaen
Alaen
2.336
hace 6 años

Colleague here in Cuba the phones do not usually go so bad. Samsung, Huawei, alcatel, ipone etc ... put the J1 in rice one or two days without the battery cover, it may have moisture, your wife starts with at least one flower and then you improvise hahaha, luck, I'm still here.

Responder
Jose Abreu
hace 6 años

ok it will be a flower brother thank you well I tell you that phone we left without a battery for 4 days behind the fridge so that the heat arrives and nothing but I will put it now in rice about 2 days grace brother from Venezuela

Responder
Alaen
Alaen
2.336
hace 6 años

Greetings and luck ... and an abrasion also because no.

Responder
Alaen
Alaen
2.336
hace 6 años
hace 6 años
Maybe the plate is dead ... some micromponent is damaged and cannot be restored ... with power follow the contacts with tester as far as you can in the part of the source, you may find the micro that is broken.
Jose Abreu
hace 6 años

I already did that test and the exit to the battery is well the load goes out and regarding cleaning the contacts was also done and nothing is dead

Responder
Jose Abreu
hace 6 años

but it will be that the voltage is shared because the battery goes to the voltage but you with your experience that you have heard that all the vetelca turn off do not turn on or stay in the attached logo and from there there is no one that was in the logo the software was stuck and I remain off now it does not turn on it was the first tests you told me and nothing

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis