⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Audio

Old sound equipment -> Adapt to new

Leandro Pugin
hace 5 años
hace 5 años
Good day! They gave me an old Crown sound system very similar to the panasonic of this image that I found on the internet, only older and the top part is not separated from the one below: My question is if there is any possibility to disassemble it and leave it alone the parts to play music and the radio, that is to say, to eliminate the part of the turntable and the cassettes (I am not sure that they work at all). And another question, those speakers need a power to function. Someone knows if it is possible to assemble or get only the power and adapt it so that those speakers work (without having the device in the middle). Thanks and regards.
Alaen
Alaen
2.336
hace 5 años

I ask leandro if what you want is to eliminate the device from the medium (what it reproduces and amplifies) can you build a small amplifier and use the speakers ... is that it?

Responder
Leandro Pugin
hace 5 años

Clear! It could be an option. Thanks for your answer!!
What I wanted was to use only the parts that equalize and amplify the device, although I have no idea if it is possible or how to do it.

Responder
Alaen
Alaen
2.336
hace 5 años

AN abrasive from Cuba ...

Responder
Alaen
Alaen
2.336
hace 5 años
hace 5 años
You would only have to locate if behind it has an auxiliary input with RCA jacks and there you connect the oooo audio input .... you could inject the signal through the cassette with an adapter like this Oooo you could look at the electronic board where the playback heads are connected and solder an adiphone cable that you no longer use like this peerooo .... use the equipment without disassembling it ... in short it is not ugly and is of a very emblematic era for music. regards Tell me
Leandro Pugin
hace 5 años

The device has two RCA outputs at the back, where the speakers are plugged in. And forward it has an auxiliary entrance too.
That is all, although sometimes the signal of one of the speakers is cut a little.
I didn't know about the cassette.
It is true that the equipment is not ugly, and surely I ended up using it like this.
Thanks for your time!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis