⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Auto Stereos

Volkswagen RCD 200 doesn't read me CDs

jaxk
jaxk
10
hace 5 años
hace 5 años
I have a car radio that is from a 2007 Volkswagen Polo, the radio in question is RCD 200, the other day a cd got stuck, I proceeded to take out the radio and open it to take out the cd, I put it back together and connected it to the car to test it, when putting a CD it enters and ejects it constantly and if I turn it off the radio and then I insert the CD it stays inside, it does not detect it, it does not read it to me and it does not eject it nor does anything when pressing the button to eject it. <iframe width="560" height="315" src="https://www.youtube.com/embed/iV2ZH8qPB-Q" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
jaxk
jaxk
10
hace 5 años

And what can I do about it? It is the first time that I try to rescue a reader of this type

Responder
cristianfain
hace 5 años
hace 5 años
Disarm the mechanism, release the reader plate and access the pik up suitch, which gives the position 0 of the pik up, disassemble it and clean it well that it gives you good continuity when it is activated. check the other suitchs to see how they are Reassemble everything and test the reader manually if you run the entire CD and position yourself at the reading point. if you do it you connect it !!
jaxk
jaxk
10
hace 5 años

Thanks for answering, as soon as I can I try to see if there is luck

Responder
cristianfain
hace 5 años

I hope it works well !!!!

Responder
julio2009
julio2009
1.094
hace 5 años
hace 5 años
The problem started when the cd got stuck, that happens when the end of the race is not going well or the dragging mechanism or out of synchro is damaged, take it to someone who knows why that is not easy to repair
jaxk
jaxk
10
hace 5 años

That happened the other day, then after paying it and turning it on a while the eject button does not respond and the cd is trapped and does not read it, at first I thought the lens was dirty but I cleaned it and the result is the same, as if nothing had been done, he ejects the CD as if he could not read it and does not recognize it as can be seen at the end of the video he leaves

Responder
jaxk
jaxk
10
hace 5 años
hace 5 años
cristianfain
hace 5 años

if the mechanism as seen is out of sync, and the end of the race is not working

Responder
jaxk
jaxk
10
hace 5 años

And how do I identify the end of the race?

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis