Good afternoon I have a Sony HC-GRX8 / R800 device without speakers to which I want to connect the speakers of a Phillips FWM998 / 55 of which I only have the speakers. Will it be possible (adapting connectors) considering the output of each equipment and the ohms of the speakers? Thank you. I leave the specifications of each team: SONY HC-GRX8 / R800: DIN power output (nominal) 105 + 105 watts (8 ohms at 1 kHz, DIN) Continuous effective power output (reference) 130 + 130 watts (8 ohms at 1 kHz, 10% total harmonic distortion) Peak music power output (reference) 2000 watts SPEAKERS: Number of speakers 4 Accepts speakers from 8 to 16 ohms impedance SURROUND SPEAKER: Accepts 16 ohm impedance speakers SUPER WOOFER: 1 V voltage, 1 kiloohm impedance PHILIPS FWM998 / 55 Output power 14000 W PMPO Total Sound Power (RMS) 1300 W SPEAKERS Number of speakers 6 3 ohms impedance Speaker Drivers 8 "woofer 2 "tweeter Subwoofer Types 10 "passive woofer Types of speakers Bass Reflex speaker system

You can do it if you put cement resistors of 10 Ohms and 20 Watts, in series, with the speakers Here is the diagram: