hello It happens that in my house there is a SONY HCD DX20 equipment, when I made it work in the cassette mode (tape A / B) it worked when I wanted, that is, it cost a lot for the cassettes to work, I opened it to see what was inside, I blew (it was a lot of dust) and I rearmed it, then I switched it on and when I turned it on it said something like "EJECT" on the screen, I turned it on again and automatically TAPE was selected and turned off, but sometimes pressing Tune the radio worked, I changed it to TAPE and it turned off, what can it be? I need help (it's from my grandfather and they will give me a good challenge hehe)

Hi Kilroy1, apparently the problem you had were the dirty buttons, now you have another problem, I suggest you uncover again and check that nothing has been disconnected, change tape bands and check buttons, that are not dirty and if that is the case replace them salu2.

I join the comments of the colleagues this problem of the word EJET is given by the cassettes and the problem is that the SWs that are at the top of the compartment where the cassette is placed are dirty and when resetting the equipment does not saw by full You have to remove the plastic that covers the two poles of these sw and clean them and check what the colleagues indicate and with this it will work for you