⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Audio equipment

How to know the omission of my sony genezi mhc-ec55 speakers?

DamianVegag
hace 5 años
hace 5 años
Hello good afternoon, I have a Sony Genezi Mhc-ec55 brand modular that some time ago it damaged a channel (common problem in these models from what I have seen) I made all the relevant repairs and it already works, but a horn is damaged, since when connected the equipment is automatically protected, something that does not happen with the other, the e open to check the omiations but they have no legends in either of them and I do not want to water it by buying speakers that are not of the correct omission, the Subwoofer gives 2.1 omhs and the acute 7.1 approx each, already look for the network but I do not give with the omissions of these speakers, someone could tell me what are the correct ones, I tell you that I am a hobbyist, I am not technical or anything like that , everything I learned thanks to the help of the community, that is why my doubt, thanks in advance. PS I know that some would say, "just open the other drawer and measure them" but these drawers are made of pressed steel and easily come apart so I don't want to mistreat the other horn.
arma170
arma170
459
hace 5 años
hace 5 años
greetings, well as he says, that when the horn is damaged, the equipment is protected, it means that some of the two speakers are short, connect one by one to know which of the two is short, in terms of information speakers are very little that can be found, so there is nothing left but to have the box to know what impedance the other speakers have, although I will tell you, I once replaced a speaker with one of similar impedance, since I could not get the horn of the same impedance.
Milflo
Milflo
1.386
hace 5 años
hace 5 años
The impedance of the horn is marked on the back of the box, but there you have the data you are looking for, if the horn is marking 2.1 ohms it is because it is already short. [Img] https://cdn.yoreparo.com/ uploads / post_ image / 0003/25 / d07008d86c20e55f4921c4d73e0502a39ec5a12f.png [/img]
DamianVegag
hace 5 años

Thanks friend, I will take it into account

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis