⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Audio equipment

Sony Genezi MHC RG290 shuts off when volume up

ICAlejoW
ICAlejoW
200
hace 6 años
hace 6 años
hello good day I have a team as in the description of the title the team works very well and all its functions but when I turn up the volume to 20 25 30 the fan starts to spin but immediately turns off could you please help me with it please Thank you very much.
Carlos Quiroga
hace 6 años

If the speakers are in good condition, it is possible that the amplifier is heating up and consuming more current than necessary or that the source does not deliver what corresponds, in any case you will have to check and comment if you saw something like an embedded capacitor or rehearsals with the overheated body, if you find nothing and the measurements of the source are fine, it is likely that the audio output is coming to an end.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

Hello, how are you friends, I already disassembled the amplifier board and I do not see any capacitor intruded or false contacts, I just have to measure the voltages to see in what conditions they are attached image of the maiboard amp
https://ibb.co/gFY3ZB2

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

I also forgot to comment in the description that when I disconnect the fan and put the equipment to sound with maximum volume it does not turn off, it only happens when the fan starts to spin

Responder
EVELIO RIOS H
hace 6 años
hace 6 años
Friend here you download the diagram and have some tips, which can help you a lot: http://13norte.blogspot.com/2012/04/standby-parpadea-en-hcd-rg290.html
EVELIO RIOS H
hace 6 años

Friend then the fault may be the fan.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

Do not compare that and change it for another and keep presenting that problem

Responder
ICAlejoW
ICAlejoW
200
hace 6 años
hace 6 años
gentlemen I started to measure resistance and I found that the R449 of 47 Ohm at 1 / 2w is altered, with the multimeter it gives a value of 57.3 and its colors are yellow violet black I still measure any doubt I will comment
Carlos Quiroga
hace 6 años

It is a fuse resistor and feeds the negative input -PRE of the STK with -42.3 V, change it and check if there is nothing else like a transistor with problems in the current temperature detectors, and output protection.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

Hello friend Carlos Quiroga I tell you to change the Resistance but it keeps going off I will test the transistors as you tell me and the part where the amp is and for safety I will change these Capacitors I do not see them inchados but maybe they are regulating badly since in the At the moment I don't have how to measure them, the ones that are in yellow are the ones that I will change and the one that is in red was the resistance I put since someone who has more knowledge than me told me that I could place it https://ibb.co/Z1VFdBS https://ibb.co/DL7DkvB

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

I keep measuring and I found the R485 SMD 104 With a Value Of 59.4 and the diagram is 100k I will be commenting on new processes

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

hello everyone I changed the filters of the fan stage and from the 3.3 and 9V voltage regulators I also changed the Q043 1266, the resistance of the amplifier stage from 47Ohm to 1/2 I put one of 47 to 5w since I could not Find the same one, I also changed the filters of the same one and I did a test of 2 songs max of volume and the team worked correctly I am going to do a test with a cd of 22 songs to max of volume to see how it works, ehh I forgot to mention To review the welds of most circuits, any questions or concerns will comment.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

If the team does not fail, I will close the forum and thank them with the qualification of the answers

Responder
Carlos Quiroga
hace 6 años

Okay. perfect, in one of the photos the C015 seems to be a little bulging at the top, the same in the other photo a little less than the one behind C447, greetings.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

Hello, I tell you, Everything Perfect, but after a while the team was shutting down for a while, I mean 1 to 2 hours, not for the fan stage but for the STK, I left it running for a while and now a single channel is playing for I will proceed to change it, and it should be working without inconvenience ... as soon as I do I will notify you and close Forum, thank you very much.

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

GOOD HAPPENED TO CHANGE THE STK AND THE EQUIPMENT ENTER STANBY, DISCONNECT THE PROTECT PIN AND THE EQUIPMENT ON, BUT I DO NOT HAVE AN AUDIO, IT DOES NOT ABSOLUTELY SOUND ANYTHING OR THE VOLUME OF VOL

Responder
ICAlejoW
ICAlejoW
200
hace 6 años

This is the Stk that I put the Being from above the original and the endorsement of the replacement, I clarify I returned the orignianl and the team did not put on standby thing that does with the replacement but with none of the 2 there was Audio https : //ibb.co/cbzQV30

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis