⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Water Heaters (Calefones)
ORBIS water heater does not extinguish the flame
9
hace 5 años
hace 5 años
Hello good day, I have an ORBIS water heater of the old ones that are sliding to regulate the water trmptempera and what happens to me is that I had no hot water pressure, then I cleaned it, also cleaned the gas injectors and assembled I had good water pressure, but it does not extinguish the flame and it boils, I changed the fiafdiafry does the same, even if the tap is closed the flame does not go out, what do I have to do?
581
hace 5 años
hello no it is not the same, you must take into account the entry and exit of the cañitos in the diaphragm but the cañitos do not coincide, you must not move or twist them, to assemble it first place the diaphragm with the sunk down then place the part from below (as if it were a clock the entrance of the pipe in the 3), place the cover (as if it were a clock the entrance in the 12), and place the screws .. the one below connects with the front outlet, and the top one with the highest side, you should buy the new oring or gummies since if you moved them they will surely lose,
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad