⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Water Heaters (Calefones)

Boiler of Indugas Pass, Does Not Turn On, and Heat Up the Batteries ..

Gerardogp
hace 5 años
hace 5 años
The boiler stopped working, does not turn on when you open the hot water faucets; the batteries of the electronic ignition were changed, and the batteries overheat at the time of closing the lid of its compartment, and it still does not work when opening the hot water faucets (the batteries are well placed in their polarity), I suspect that this badly the coil from where the spark plug wires come out. My question is: How can I confirm that the coil is wrong? What if there are spare coils as a spare? Thank you very much in advance for the attention and help that you can offer me. Your attentive and secure server. Gerardo García.
Comentar
Jacobo Mauricio Aguilar
hace 5 años

I have touched cases of overheating in battery box due to excess dirt or moisture inside the housing, first make sure this detail

Responder
servimat1
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. There is an oscillator module that creates the ignition spark from the battery. This module must be short and you must change it. regards
Comentar
Gerardogp
hace 5 años

Thank you, Yes, I'm sure there is a short; Could you please tell me where I find that oscillator module. Thanks friend.

Responder
Gerardogp
hace 5 años

Disassemble the entire electronic circuit, and I would like to upload a photo, but I can't find how to do it. Because even with the circuit outside the boiler, the batteries continue to heat up. Thanks servimat1

Responder
servimat1
servimat1
servimat1
138.835
hace 5 años

The batteries must have started a discharge state when the device is short. Verify that this module is where the spark-giving cable comes from.

Responder
Gerardogp
hace 5 años

Okay my friend, thank you, I just saw a tutorial on youtube, and I left my doubts, you're right, it's the ignition module that is wrong.
Thank you very much for your kindness, and your attention, take care, that you are well.

Responder
servimat1
servimat1
servimat1
138.835
hace 5 años

Nice to help you. regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos
Héctor Castiñeira
$ 60 USD
$ 20 USD
COMPRAR
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
COMPRAR
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis