Good guys, I have a problem. My hot water tank began to lose water from the tap where it was purged. I took the thread but I see nothing that can be adjusted or unbalanced it can be? I clarify that the water with which it is loaded comes from a tank but this has always been the case for about 5 years.

Hi Possibly it has a lack of maintenance and has lime inside, so when heating, the pressure increases more than is due and loses by the safety overpressure valve ...... https: //www.youtube.com/watch ? v = bRkqINJlaSo Cheers

Hi guys, thank you very much for the answers. I wanted to let you know that effectively change only the faucet looks like a morris or the gum was already damaged. I changed it and it was 10. Now the problem is that when I drain it, the hot water tank is empty. And do not load water unless you open the faucets where hot water comes out but it will never fill up. For that I have to loosen or something some valve that has on the top or how would the procedure be for the first time the air comes out and is filled? Because it is cone that I am placing a new hot water tank since it is empty. Thank you!!

if you have to open the faucets with the thermos off and the hot water goes out