⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Water Heaters (Calefones)

Traditional Junker heater does not turn on after membrane change

Miky Hendrix
hace 6 años
hace 6 años
Hi. Someone knows what a problem it may be that my traditional Calefon does not get the gas up just in the pilot's spark without problems. ? I have changed the membrane, I even realized that the membrane pushes a piece upwards which is what allows the gas to escape, so I tried taking out the entire hydraulic valve and so I turned on the pilot and press that piece that is supposed to move the membrane and still no gas arrives only pilot. Is there something covered after passing through the hydraulic valve?
mariotti luis marcos
hace 6 años

Hello, if you use bottled gas, check if you have gas pressure, upload an image to see the device of the device greetings

Responder
Miky Hendrix
hace 6 años
hace 6 años
Finally I paid for the arrangement for a very minimal detail that was just to lower a can near the pilot I think was called biometal or something like that. I couldn't believe I had to pay because only the technician moved a can with a screwdriver ????????
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis