Calefont doesn't throw me hot water.
The water comes out normal with the same intensity as always, the problem is that the calefont is not activated to heat the water. The problem would be the diaphragm, right? If so, where do I get the replacement?
In any hardware store or bouquet houses, but it would be convenient to take the sample.
I am not familiar with the subject that is why the error in naming. I do not know what is the part that is failing, the shy flame turns on, what does not turn on are the others when opening any hot water tap. I don't know if I explain myself, but I would like to know where the fault would be if in the rubber band of the diaphragm or the failure could come from elsewhere. Thank you!!
Now take out and check the diaphragm rubber and it is intact so the problem comes from somewhere else. Now I will try to upload photos
Hi NahuelEnriq, as colleagues tell you, it is very likely that it is the gum of the diaphragm but eye, that it does not have holes visually or this fissure does not mean that it is well considered that if it has more than 8 months you should change it if or if .. why with use and time they expand too much and do not do well if I work and that means less gas flow and therefore less flame ..
