⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Water Heaters (Calefones)
Water tank
hace 6 años
hace 6 años
The problem is that the hot water tank is overheated until the water boils and does not cut. I already tested reducing the resistance regulator and it does not heat the water. I raise it again and I have to cut it manually until it has a temperature that can be used.
hace 6 años
The thermostat that has a resistance seems. I'm going to change it. Test with the tester and have it continued. Would the button panel be another fault?
6.132
hace 6 años
The thermostat may have continuity but the contacts may be stuck and therefore does not cut off the current when the water reaches the cut-off temperature. But at the same time the thermal safety that acts when the thermostat has this fault and the water boils. You must change both elements. Arming
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad