⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Water Heaters (Calefones)

Location of injectors / spikes in Tartaglia water heater (photo upload

pampero1234
hace 6 años
hace 6 años
= 12.0pt Good afternoon First of all thank you very much for reading the message. I have a 14L Tartaglia water heater for sale (it is a very old model but it is new without use). I need to know if it is for bottled or natural gas, with which I must access the peaks, but in this case (I am not an expert) I can not find them, in the videos I saw online they would be along a pipe below the burner, but is it possible that they are somewhere else, if it is a very old model? I upload a photo I hope it is well uploaded. As always, thank you very much, they are of great help to me Diego
pampero1234
hace 6 años

I clarify that it has no identification tag.

Responder
servimat1
servimat1
138.835
hace 6 años
hace 6 años
Hi. It is as you say. The peaks are along the pipes that cross. The issue is that many times they are not spikes as such but they are usually perforations of a calibrated diameter along the pipe. Regards
pampero1234
hace 6 años

Thank you very much for the reply.
then it sure has perforations along the pipe.
How could I know then what kind of gas it is?

Responder
servimat1
servimat1
138.835
hace 6 años

You can approach by its diameter. If they are very small it would be for bottled gas.

Responder
pampero1234
hace 6 años

I understand, I will try to pull out the pipe and measure the holes with a caliber

Responder
servimat1
servimat1
138.835
hace 6 años

With a common caliber you will not be able to since they are very small. There are special seaweed for this. The one of a photo is like to verify to "eye of good cubero" the type of gas.

Responder
Walter dal farra
hace 6 años
hace 6 años
Hi Diego: to see that you should take out the burners, if you give the hole diameter and the amount of burners we can tell you what power it has, both natural and bottled gas. LUCK
pampero1234
hace 6 años

Hello Walter, I would only be interested to know what type of gas you use, the presentation would not be necessary.
From already thank you very much!
Diego

Responder
mariotti luis marcos
hace 6 años
hace 6 años
hello: you can know what type of gas it is, taking out the pilot injector and taking it to any spare house just by looking at it they tell you if it is bottled or natural gas it will be easier for you to disassemble the burners greetings
pampero1234
hace 6 años

thank you very much Luis

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis