⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Water Heaters (Calefones)

Orbis heater with keypad. It turned on and when it opened hot water it

kolo1962

hace 6 años

Good companions I am not a technician. When the hot water opened, it turned off in minutes. Now it doesn't turn on. No gas passes Heat the pilot sensor with a lighter but no gas passes. Of course, when cooling you feel the noise that cuts. So that censor works. How do I know what it is and how do I prove it? Thank you

Comentar

kolo1962

hace 6 años

Hi.
I bridged the censors and turned on!
But after a minute it goes out.
Help !
Thank you



Responder

kolo1962

hace 6 años

I tried the magnetic temocupla and it works.
Turn on the normal pilot.
I open hot water and the seconds goes out.
I have the bridged sensors.
Help



Responder

kolo1962

hace 6 años

I tried it with a battery and lock.



Responder



mreyess

hace 6 años



hace 6 años

Hello, you noticed that the pilot's flame is constantly on the thermo cupla and that the intensity of the flame does not drop when giving way to the water, if so, there could be a failure with the gas supply that reaches the device Regards.

Comentar

kolo1962

hace 6 años

Hi Mreyess.
The problem was the pilot's thermocouple that didn't give him enough heat.
I changed the thermocouple and the complete pilot.
Inside it brings a peak that is covered and changed. Thank you



Responder