New water heater does not ignite
Finally the aerators were the one in the bathroom I had to clean it because it had plastic remains and some pebbles and I made some holes in the filter because it comes as three layers of filter in the same aerator and the one in the kitchen I had to remove it directly because it had Apart from a filter, a minivan valve type is male thread and when I wanted to remove it, it broke, so I left it without it, but finally the problem was solved, now it turns on the water heater! Thanks so much for the help!!!
Hello, if water comes out and comes out with good pressure because everything is new I get water from all the faucets the problem is that it does not light the burner when there are the faucets now that I put the pressurizing pump on when opening the shower that did not previously left but still not turning on when opening the other faucets
It is rare that you do not turn on the heater in some areas. If you turn on in the shower, hot water comes out of the places where it does not come out without opening it? Normally turn on the pump? Possibly it must be calibrated (if the brand and model allow it) to start at all points.
Layers will have any water or gas regulation valve? If I open the faucet of the bathroom sink and the faucet of the kitchen sink if it turns on but if there is only one it does not start it is as if it will lack pressure so I bought the pump but it seems that it is not that it already has too much pressure and still no prwnder
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
