⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

Whirlpool washing machine does not drain water

Arturo integrado
hace 5 años
hace 5 años
Good afternoon in advance thanks for the help I have a whirlpool washing machine that does not drain the water I already tried the pump and it does not work but I have the doubt that when I ask the price it is a bit high now they tell me that I cannot buy any spare part since it works at 120 volts 60hz 0.6amps I can make a modification to put another pump I thank you for your help thanks
CESAR CORTEZ
CESAR CORTEZ
5.351
hace 5 años
hace 5 años
Good night Arturo. You can buy any spare that closely resembles the electrical characteristics of the original pump. Among other things, there are mainly 2 reasons why it is not recommended to buy spare parts other than the original, one because if you buy a pump of less than the original power, you probably cannot drain the volume of water in the estimated time for the washing machine, and runs the risk of taking this pump to life, eventually damaging it quickly. And the other reason is that if you buy a power pump greater than the original, if it is an electronic card washer, you run the risk of damaging the card element that controls the drain pump. Those are the reasons why, as far as possible you should buy the original spare part, you run less risk at the end of it all. In the case that you cannot buy the original, just make sure that the replacement you buy is of electrical characteristics almost identical to the original, not to mention the hose adaptations you may have to do. Regards!!!!
Arturo integrado
hace 5 años

Very well, thank you tomorrow, I will search as you indicate and I will inform you about what happens

Responder
Arturo integrado
hace 5 años

Good day with respect to the washing machine whirlpool 16 kg xpert syste already change the drain pump and now it works the problem is that in Off mode I connect it and the pump starts working and locks the insurance that is to say when connecting turn on the squeeze and safe LEDs of the cover and from there it no longer obeys as I comment in off mode I connect and light the LEDs as if it were direct

Responder
CESAR CORTEZ
CESAR CORTEZ
5.351
hace 5 años

What washer model you have.

Responder
Arturo integrado
hace 5 años

It is expert system

Responder
Arturo integrado
hace 5 años

Thank you for your attention and help since the washing machine

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis