⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Clothes Washers and Dryers

GE TL100BM washing machine is activated when connected without giving

Jonathan Nieto Mariño

hace 5 años

Hello friends, I have a problem with a GE washing machine when connecting it, the electroiman is activated directly ... its board is la228c2023 G001 when they brought it to me, I found that when it was connected it was short, a few tracks and many diodes were revealed directly ... replaced all this and rebuilt tracks but now this problem presents me that when the connection is activated the electro-electrode / solenoid / guillotine as they call it anywhere if someone can help me thanks

Comentar

lusangor

56.366

hace 5 años

Hi, the triac that feeds it is wrong, replace it regards

Comentar

Jonathan Nieto Mariño

hace 5 años

hello friend the problem is that this triac does not have numbering maybe you have any reference forget to put that in the previous question
if you have a triac reference, you would help me a lot thanks for taking the time to answer



Responder



CESAR ALEX

40.413

hace 5 años



hace 5 años

I think the card model was wrong. I think it must be 228C2032 G001. If you confirm that this registration is correct, then you should change the MOSFET marked Q1. This is usually 03N60 and you can, if you fail, place any of these other Mosfet .. P6NA60 IRF830, IR840, IRF740 Or the latter, IRF850. It is also important to check the status of the Solenoid. This should measure 140 and up to 150 ohms, any other value outside this range, would imply partial or total damage thereof. Regards

Comentar