Problems with my washing machine
That is the subject that I put the tester but does not give me any reading or turning with the hand, but when trying with current if it gives me 36 vol and that is that it baffles
if in continuity, mark 000, the tachometer is short, now if it beeps, but it marks some value, example 110, 080, it means that there is resistance
When it beeps it marks me -1 like this or if it also marks me 1 alone and out there moving the tips a bit sometimes it marks me 000
Another question if the plate presents a problem would have to mark me error in the washing machine if or if or it may have some failure and not mark me anything
It is a standard electric ste 5515 look at the problem began that I was wrong 8 find out what that meant and told me it was the triac of the heat sink, I changed that and also the carbons of the engine that tested outside the washing machine is a sedita but at place the water all right and when it starts to move the drum turns off again lasts about 3 seconds just turning the drum
Look trying the engine out of the washing machine is fine but the problem is when I put in the washing machine with all its connections is there when you move the drum turns off.
I did not place a new plate, I just changed the heat sink triac and the outlet has no false contact, that is all good, I have the doubt between the tachometer and it can also be some component of the platelet
That is the problem that does not throw me any error. When I got the error 8 I changed the heat sink triac and that problem was solved there is this other problem that the engine placed in the washing machine giving the order for the wash cycle loads the water and when the washing begins is when for all.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
