⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

washing machine does not spin

gabriell2017
hace 5 años
hace 5 años
hello I have an aquarius glasses washing machine that performs the entire washing cycle but does not spin the cilo ends and the clothes are dripping water
Titoboliche
hace 5 años
hace 5 años
did you notice if it emptied completely? if there is water left, it will not spin out .... see that the filter is uncovered ... it is an option ... and another worse is that the drum has loosened from the shaft and does not rotate when it has to, that happened to me with a similar top-loading drean .... first, off, try to turn the drum by hand, if it turns this is the last one ....., in that case you have to take out the paddle and see that there is a screw that tightens the aluminum spider on the shaft, ... if you still did not spend it on the friction, you squeeze it and you are ready ... but you are in trouble because you have to disassemble and see what is good and what you already ate can be the shaft or the spider , O The two
alturasbal
alturasbal
27.174
hace 5 años

Hello, the glasses do not have an adjustment wedge, the drum or vat is fastened with 4 screws to the flange of the spin axis.
Comment if you mark any error by flashing the LEDs or on the display if you have, greetings.

Responder
jonas
jonas
34
hace 5 años
hace 5 años
Surely the drain pump is defective. Or the motorcycle drive is not working. Review and comment.
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, remove the belt and check whether or not the motor rotates in the spin. With that we will have a better picture of the problem. regards
gabriell2017
hace 5 años

hello and thank you all for your answers I tell you the water pump works well and the washing machine turns when it centrifuges it is as if it lacks bone strength it rotates the drum but does not raise the speed you need

Responder
luis38
luis38
95.432
hace 5 años

Dear, if you rotate the drum but it lacks revolutions, it may be that the tension spring inside the plastic gear on the pulley is damaged. Check and comment. regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis