Good colleagues, the client tells me that the washing machine overflows it overflows the water while washing, I tried putting it to wash and blow by the hose at the first attempt she began to wash, but then I tried again in different washes and unplugging the machine and she no longer responded more to the blow, the click feels but does not stop loading. Test the pressure switch outside with tester in continuity mode and it works correctly but not in the machine, will it be the pressure switch? Or can it be the plaque? The solenoid valves work well directly at 220v and the two measure 3.60 ohms their coils. FROM ALREADY THANK YOU VERY MUCH!!

Hello, measure continuity in the wiring from pressure switch to the board, if it is ok try another pressure switch, regards.

Check that the inlet valve is not locked. There are times when not closing still charging.