⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers
Hi. I have a washing machine general electric drying problem
3
hace 5 años
hace 5 años
HI. I HAVE A 9KG GENERAL ELECTRIC WASHER. I CHANGED THE ELECTROVALVULA BECAUSE IN THE DRYING POINT I WANTED TOO MANY WATER. BUT STILL DOING IT. WHAT CAN BE?
I MADE A PRUBA, LEAVING THE HOSE ON A BUCKET IN THE DRYER CENTRIFUGED PROGRAM. I LEFT A RIGHT YH TO RETURN. , THE EDGE WAS OVERFLOWED AND THE FLOOR FULL OF WATER. WILL IT BE THE PLATE?
3
hace 5 años
HI EVERYONE!! EVERYTHING INHERENT TO THE WASHING MACHINE WORKS PERFECT IN THE DRYING PROGRAMS WITHOUT DRYING. ONLY WHEN THEY ARE IN DRYING PROGRAM, ONE OF THE WAYS OF THE WATER INLET VALVE IS ACTIVATED, AND WHILE THE DRYING MOTOR IS ACTIVATED AND THE RESISTANCE AND ENGINE ROTATES, IT DOES LOADING WATER AND DEFROSTING ALL AT THE SAME TIME. IS TO SAY THAT THE CLOTHING, EVEN EVERYTHING WORKS PROPERLY, NEVER DRIES, BECAUSE IT ENTERS AND EXITS WATER AT THE SAME TIME, REITERO THAT IT IS NOT THE VALVE YOU CAN ALREADY CHANGE. THANKS
57.307
hace 5 años
hace 5 años
Possibly one of the triac that controls the solenoid valve is damaged, check the electronic card or have it repaired.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad