⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

how to get a patrick's lick out

Ariel Ignacio
hace 5 años
hace 5 años
How about I need to verify a triac but I am not being able to separate the plate from the selector knob that is in the center, and I do not want to break anything, someone who has already removed it as it is done ?, someone who knows, I do not see any screws or locks in sight
Ariel Ignacio
hace 5 años

thanks and take it out, the plate goes perfectly behind, only that it is very attached to the knob, with care and pressure it goes well behind without more

Responder
pulgarcitos
hace 5 años

great....

Responder
pulgarcitos
hace 5 años
hace 5 años
hello, the way that I use is removing the knob first .. it has some obstacles at the bottom .. not accessible .. you must make force to be able to extract towards the front it is preferable to break these obstacles to break the potentiometer by pulses since if you try to remove the plate by unlocking it from the springs that lock on the housing and taking it aside to remove it you can break the pot and associated plate tracks .... it has already happened to me and then you must rebuild them ..
Ariel Ignacio
hace 5 años

Thank you but I just don't want to break anything, I mean the knob comes out, if I saw the trabitas but there are 4, they are many how to hold them, and I feel that if I throw out, the palce suffers too, it's like the knob was attached to the plate, but if you tell me that the plate is not unique to the knob I could try to pull the lever hard out

Responder
pulgarcitos
hace 5 años

the knob is not attached .. it costs but you can .. but you have to try to remove the plate if you are afraid to remove the knob .. but you should always do it right to bend or break the pot .. because if you move from side the plate the pot bends ... it has only two points fixing points on the sides plus the three contact welds ... carefully you should be able to ...

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis