⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Clothes Washers and Dryers

Aurora T-5502 spins slowly in centrifuge and with a lot of clothes doe

khaihu

hace 5 años

Hello!!! I have a 10-program Aurora T-5502 washing machine, I changed the original capacitor (Elecond), because it was shorted, for another of equal value 16 mf, but different brand. When washing it with clothes, the motor does not turn, and in spin it turns very slowly, I test it without clothes, with water, it does the whole cycle normally, but when spinning, it also does it slowly, Before with the original capacitor, it worked well, can you help me, is it the capacitor or the motor that was damaged? Thank you!!!

Comentar



luis38

95.432

hace 5 años



hace 5 años

Dear, here is a guide to test the motor of this washing machine. If the engine is fine, the problem may be the programmer.

Regards

Comentar

khaihu

hace 5 años

Thank you!!! For the connection circuit of the motor terminal block and for all the technical assistance
Indeed, I tested the motor as you told me, it works correctly, the problem is in the programmer, the contacts that connect the condenser to the motor melted, both for washing and for spinning, which prevents the motor from starting.
I have nothing left but to buy a new washing machine, since I found out, the programmer is no longer available,
and to get it is quite expensive



Responder

luis38

95.432

hace 5 años

Dear, if the machine is in good general condition, a good option is to replace the electromechanical programmer with a direct digital replacement. This allows you to recover your washing machine for another time. Regards



Responder

khaihu

hace 5 años

Luis, could you tell me the model and the brand of the replacement, since I have looked for it in the house of spare parts that I usually buy and do not know it, and if you have the electrical connection circuit to adapt it
Thank you so much!!!



Responder

luis38

95.432

hace 5 años

Dear, you can use the RP 757 universal programmer or the direct replacement of the 162A. Regards



Responder

alturasbal

27.174

hace 5 años

Hello, try the engine outside the washing machine to rule out faults, if it is correct, check if there is voltage to the motor connector when it has to work, comment the results, greetings.

Comentar