Hi, I'm Orlando from San Vicente Bs As Argentina. I have a Diplomatic Mod washing machine: DP 135 C. When I put it to wash, or centrifuge, it does the whole process, in the wash it loads the water, and when it is ready, starting the biper sounds and marks the LE display, the same goes for the centrifuge, discharges the water, and when it is ready to centrifuge, the alarm sounds and LE marks on the display, I changed the pressure switch, because the one I had did not work. It's from the electronic ones, just like the model I had. He had taken the card to buy the same pressure switch, with the same ticket. I lost the pressure switch and the card, but take pictures of another washing machine just like I have at home, place the wires as they were on the other. 20180131_091806 [1] .jpg [3.99MB] [url = / ver- attached / aHR0cHM6Ly9jZG4ueW9yZXBhcm8uY29tL3VwbG9hZHMvZGVmYXVsdC8wMDAyLzc3LzIwMTgwMTMxXzA4MzQwNlsxXS02MTcz0401401mb1_401401mb1401406mb1_06201mb1_06201mb1_06201mb1_06201401mb1_06201401mb1_201401mb1_06201mb1

Hi, access the door security microswitch and bypass the two terminals, just to see if the error goes away Regards