⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

Washing machine under table

Maximiliano
hace 5 años
hace 5 años
Hello community, I have a problem with placing the washing machine under the table of the apartment where I began to rent. It is a 7 kg Whirlpool. I already removed the lid but the following happens: 1) Even if you take the lid off, you need a little to get in because it is going to collide with a support that protrudes from the top of the washing machine, then I will take out the legs and rest it on a cardboard. It's a good idea? 2) the other problem is the width, almost not entering by 1 mm, rubs on the bottom with the furniture under table. If I put it under pressure, with the risk of scratching the washing machine, when I spin and wash it will hit the sides, right? Because it would enter very close, it has 2 or 3 mm of space above. Thank you and greetings. P / D was thinking of selling it and buying a 5kg one, because I can't change my rent
juan guillermo caceres
hace 5 años
hace 5 años
Hello, sometimes one encounters these problems that can easily be solved if the architect who designed would have enough common sense to take measurements of the washing equipment but finally we are. Removing the adjustable rails is not advisable since the rubber cover also serves to not slide and cushion the centrifuge, perhaps it would be best a rubber base with the highest possible height of the counter. As for the width there is a false square of the furniture since both above and below it has to touch. Maybe your last option is feasible but first see at home appliances and with meter in hand measures that fit your needs Greetings and luck
Maximiliano
hace 5 años

I tell you that I made dear guille, I put it on the front side, since it is a kitchen where the washing machine goes, kitchen, refrigerator ... all together. Then, I bought some extensions of the water intake and the drain and that's it. While it is not aesthetic to see the hoses crossing the bottom from side to side, it was the fastest and most economical thing to do. Regards

Responder
juan guillermo caceres
hace 5 años

Dear, I understand that you managed to place one appliance next to another. If this is the case, consider this recommendation, the kitchen oven, when raising temperature, it would affect the wiring of the other equipment by proximity.

Responder
juan guillermo caceres
hace 5 años

Therefore I suggest placing asbestos iron on both sides of the kitchen. That will protect the other equipment from the temperature, keep it in mind, attend several cases like this, almost new washing machines with calcined wiring for being next to the kitchen. Greetings and great weekend for you.

Responder
Maximiliano
hace 5 años

Thanks Guille for the recommendation. There is a small furniture of a door between the kitchen and the washing machine, would you think that the heat will not come to you, right? Good data you give. Regards

Responder
juan guillermo caceres
hace 5 años

Hello, if so, the heat will not affect the equipment, only that the furniture over time will be affected and more if it is melamine with agglomerate. Greetings and have an excellent day.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis