⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Clothes Washers and Dryers

Philco doesn't cut the water.

Adolfo Silva

hace 5 años

Good afternoon, I add to my question something I did, turn on the washing machine in the wash function, disconnect the pressure cuff from the pressure switch and keep a small pressure blowing very soft and constant, while I do it the washing machine starts and washes when I stop blowing. It also gives me the impression that the water does not rise to the outlet where the hose is connected. Will the pressure switch be or does the water not rise to the hose? Thank you.

Comentar



lusangor

56.366

hace 5 años



hace 5 años

Hello, the water does not have to rise. When you blow and start to wash, bend the hose and check if you continue washing, if you stop doing so, you are losing pressure from a damaged hose or pressure switch. Regards

Comentar

Adolfo Silva

hace 5 años

Thank you very much, and I have a doubt, the hose is impeccable and is tight in each socket with the springs, so if the pressure switch stops, does it not?



Responder

Adolfo Silva

hace 5 años

Lusangor, I did what he told me to blow and then bend the hose and continued to wash perfectly, however if it is connected to the bottom of the washing machine continues to charge the water. Thank you



Responder

lusangor

56.366

hace 5 años

empty the washing machine completely to put the hose, if you do it with water, that amount has not detected and continues to take. Blow through the hose from the pressure switch part, to the tub in case it has obstruction, check that the hose is damaged in some section



Responder