⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

Washing machine electrolux Elba 7.8 new plate. It does not turn on

Lauto
Lauto
147
hace 5 años
hace 5 años
Good afternoon I am repairing an electrolux Elba 7.8 washing machine washer to the same electronic board is replaced all components are tested but does not turn on the connection tabs arrive thank you very much
alturasbal
alturasbal
27.174
hace 5 años
hace 5 años
Hello, check if the 5 VDC arrives at the programming board / keypad, comments, greetings.
Lauto
Lauto
147
hace 5 años

Thanks for attending my tester is half broken in VDC does not measure I will try to change the board then I comment

Responder
wilson josé tecnico
hace 5 años
hace 5 años
check if the AC connection cable is in good condition, comment on its progress
Lauto
Lauto
147
hace 5 años

The problem was in a pin of the negative cable plate connection tab that did not close well and did not make contact

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis