frame: your problem is that the pressure switch of the appliance is covered or damaged, uncover the washer cup. or if you can lay it down, and check a little hose that goes up to the top, uncover the top and where that sleeve arrives on the pressure switch, check that the sleeve is uncovered and pass the air freely (if not, put a little wire along the length of the same until it comes out in the tub and blows again) so also check that the part of the pressure switch where the hose enters is unobstructed, but it will result you will have to change your pressure switch, try and comment and there are block doors, there is a tutorial what does it say; how to lock the door swich of the whirpool washing machine comments