ROBERTO BERENYI

25.004

hace 6 años

It is not a problem of door blockers, but of plate. It is a problem too frequent in the Next.

Carlos Quiroga

1.400

hace 6 años

Hello, I put a picture of the blockhouse because it does not come out with that number to see it and be able to orient you.

Claudio Persson

1.477

hace 6 años

Thanks Roberto, it's good to know. Anyway, I'm curious to know if it is possible to perform a functional test. A hug.

Claudio Persson

1.477

hace 6 años

Hi Carlos. Thanks for answering. I attached a photo of the blockhouse in question.

Carlos Quiroga

1.400

hace 6 años

Tell me what color of wires are in the terminals, and if you measure two of the pins you have to measure resistance without touching the door switch I think it's between 3 and 5, comment to continue.

Claudio Persson

1.477

hace 6 años

The colors are:
2- Blue
3- White
4- Brown
5- Brown

Carlos Quiroga

1.400

hace 6 años

You did not put the measurement, but because of the colors the Blue is neutral, the browns are line, what would remain is the white. If you measure between the Blue and one of the brown that gives you the measurement?

Claudio Persson

1.477

hace 6 años

Thank you for your good predisposition Carlos. On a Russian page I found the diagram of the previous version of Bitron T85 (DL-S1) and, guided by the colors, the contacts match those of the new version (DL-S2).
Namely:
2- Neutral towards PTC (bimetal)
3- Pulse input for coil
4- Common phase input
5- Phase output to plate
I'm going to spend it clean with images to share with users. Thanks again for your time. A hug and your orders.

Carlos Quiroga

1.400

hace 6 años

No problem as Alf said, now we know what the connection is like to test it, regards.